Resumo Estudos vêm demonstrando uma diminuição na resistência adesiva em dentina tratada com hipoclorito de sódio (NaOCl). O objetivo desse estudo foi avaliar o efeito do plasma de argônio não-térmico na resistência de união de um sistema adesivo autocondicionante à dentina exposta ao NaOCl. Trinta e duas superfícies dentinárias lisas de incisivos bovinos foram imersas em NaOCl a 2,5% por 30 min para simular o passo de irrigação durante o tratamento endodôntico. Os espécimes foram divididos em 4 grupos (n=8), de acordo com o tratamento de superfície: Controle (sem tratamento de plasma), AR15 (plasma de argônio por 15 s), AR30 (plasma de argônio por 30 s) e AR45 (plasma de argônio por 45 s). Para teste de resistência de união por microtração, cinco espécimes foram utilizadas por grupo. Em cada grupo, os espécimes foram hibridizados com um sistema adesivo autocondicionante (Clearfil SE Bond, Kuraray) e blocos de resina composta foram construídos. Após 48 h de armazenamento em água, os espécimes foram seccionados em palitos (5 por dente - 25 por grupo) e submetidos ao teste de resistência de união por microtração (μTBS) até a fratura, avaliando o padrão de fratura. Três amostras por grupo foram analisadas sob espectroscopia por FTIR para verificar as modificações químicas produzidas pelos tratamentos na dentina. Os dados de microtração foram avaliados estatisticamente utilizando os testes de ANOVA e Tamhane (p<0,05). AR30 apresentou o maior μTBS (20,86±9,0). AR15 (13,81±6,4) e AR45 (11,51±6,8) foram estatisticamente semelhantes ao controle (13,67±8,1). A espectroscopia por FTIR mostrou que o tratamento de plasma produziu modificações químicas na dentina. Como conclusão, o tratamento de plasma de argônio não-térmico por 30 s produziu alterações químicas na dentina e melhorou o μTBS do Clearfil SE Bond à dentina tratada com NaOCl.

Abstract Studies have been showing a decrease of bond strength in dentin treated with sodium hypochlorite (NaOCl). The aim of this study was to evaluate the effect of non-thermal argon plasma on the bond strength of a self-etch adhesive system to dentin exposed to NaOCl. Thirty-two flat dentin surfaces of bovine incisors were immersed in 2.5% NaOCl for 30 min to simulate the irrigation step during endodontic treatment. The specimens were divided into four groups (n=8), according to the surface treatment: Control (without plasma treatment), AR15 (argon plasma for 15 s), AR30 (argon plasma for 30 s) and AR45 (argon plasma for 45 s). For microtensile bond strength test, 5 specimens were used per group. In each group, the specimens were hybridized with a self-etch adhesive system (Clearfil SE Bond) and resin composite buildups were constructed. After 48 h of water storage, specimens were sectioned into sticks (5 per tooth, 25 per group) and subjected to microtensile bond strength test (μTBS) until failure, evaluating failure mode. Three specimens per group were analyzed under FTIR spectroscopy to verify the chemical modifications produced in dentin. μTBS data were analyzed using ANOVA and Tamhane tests (p<0.05). AR30 showed the highest μTBS (20.86±9.0). AR15 (13.81±6.4) and AR45 (11.51±6.8) were statistically similar to control (13.67±8.1). FTIR spectroscopy showed that argon plasma treatment produced chemical modifications in dentin. In conclusion, non-thermal argon plasma treatment for 30 s produced chemical changes in dentin and improved the μTBs of Clearfil SE Bond to NaOCl-treated dentin.

<sec><title>Aim:</title><p>To evaluate enamel microhardness and morphology after bleaching with hydrogen peroxide containing calcium in different concentrations.</p></sec><sec><title>Methods:</title><p>One hundred specimens of human teeth were ground and polished and had the initial microhardness evaluated. The specimens were randomly assigned into five groups (n=20): Group 1 - Control group (no treatment); Group 2 - Home Peroxide 6% (without calcium); Group 3 - Home Peroxide 7.5% (without calcium); Group 4 - White Class 6% (with calcium); Group 5 - White Class 7.5% (with calcium). For each group, the bleaching was performed according to the manufacturer's specifications. The specimens were bleached once a day for 5 days and subjected to pH cycling. Microhardness and scanning electron microscopy (SEM) analysis were performed before and after bleaching.</p></sec><sec><title>Results:</title><p>The results showed that groups submitted to bleaching treatment presented hardness loss compared to the control group. The group of 7.5% hydrogen peroxide with calcium showed a lower percentage of hardness loss in relation to other groups.</p></sec><sec><title>Conclusion:</title><p>Calcium in association with a higher hydrogen peroxide concentration may decrease microhardness changes on enamel.</p></sec>

Este estudo comparou a resistência à compressão de uma resina composta e de um compômero, fotoativados com luz halógena convencional de quarto-tungstênio (QTH) (XL 300, 3M/SPE) e LED azul (SmartLite PS; Dentsply/De Trey). Foram confeccionados 40 espécimes em forma de disco usando uma matriz bipartida de politetrafluoretileno (4,0 mm de diâmetro x 8,0 mm de altura) em que o material foi inserido incrementalmente. O tempo de polimerização de cada incremento foi de 40 s para a luz halógena convencional e de 10 s para o LED. Os espécimes foram aleatoriamente alocados em 4 grupos (n=10), de acordo com a fonte de luz e com o material restaurador. Depois de armazenadas em água destilada a 37°C ± 2°C por 24 h, a resistência à compressão dos espécimes foi testada em uma máquina universal de ensaios com célula de carga de 500 kgf a uma velocidade de carregamento de 0,5 mm/min. Os dados (em MPa) foram analisados estatisticamente por ANOVA e teste de Student-Newman-Keuls (p<0,05). Para a resina composta, a fotopolimerização com luz halógena não produziu diferença estatisticamente significante (p>0,05) em sua resistência à compressão quando comparada à fotopolimerização com LED. Contudo, a fotopolimerização do compômero com a luz halógena resultou em uma resistência à compressão significativamente maior que a feita o LED (p>0,05). A resina composta apresentou resistência à compressão significativamente maior que a do compômero, independente da fonte de luz. Concluiu-se que a resistência à compressão dos materiais fotopolimerizados com luz halógena e LED foi influenciada pela densidade de energia empregada e pela composição química dos materiais restauradores estéticos.

This study compared the compressive strength of a composite resin and compomer photoactivated with a conventional quartz-tungsten halogen-light (XL 3000, 3M/SPE) and a blue light-emitting diode (LED) (SmartLite PS; Dentsply/De Trey). Forty disc-shaped specimens were prepared using a split polytetrafluoroethylene matrix (4.0 mm diameter x 8.0 mm hight) in which the materials were inserted incrementally. The curing time of each increment was of 40 s with the QTH and 10 s with the LED. The specimens were randomly assigned to 4 groups (n=10), according to the light source and the restorative material. After storage in distilled water at 37oC ± 2oC for 24 h, the specimens was tested in compressive strength in a universal testing machine with load cell of 500 kgf running at a crosshead speed of 0.5 mm/min. Data (in MPa) were analyzed statistically by ANOVA and Student-Newman-Keuls test (p<0.05). For the composite resin, light curing with the QTH source did not produce statistically significant difference (p>0.05) in the compressive strength when compared to light curing with the LED source. However, light curing of the compomer with the QTH source resulted in significantly higher compressive strength than the use of the LED unit (p>0.05). The composite resin presented significantly higher (p>0.05) compressive strength than the compomer, regardless of the light source. In conclusion, the compressive strength of the tested materials photoactivated with a QTH and a LED light source was influenced by the energy density employed and the chemical composition of the esthetic restorative materials.

The concepts of health promotion, self-care and community participation emerged during the 1970s and, since then, their application has grown rapidly in the developed world, showing evidence of effectiveness. In spite of this, a major part of the population in the developing countries still has no access to specialized dental care such as endodontic treatment, dental care for patients with special needs, minor oral surgery, periodontal treatment and oral diagnosis. This review focuses on a program of the Brazilian Federal Government named CEOs (Dental Specialty Centers), which is an attempt to solve the dental care deficit of a population that is suffering from oral diseases and whose oral health care needs have not been addressed by the regular programs offered by the SUS (Unified National Health System). Literature published from 2000 to the present day, using electronic searches by Medline, Scielo, Google and hand-searching was considered. The descriptors used were Brazil, Oral health, Health policy, Health programs, and Dental Specialty Centers. There are currently 640 CEOs in Brazil, distributed in 545 municipal districts, carrying out dental procedures with major complexity. Based on this data, it was possible to conclude that public actions on oral health must involve both preventive and curative procedures aiming to minimize the oral health distortions still prevailing in developing countries like Brazil.